Undergraduates

  • Hamel, Timothy; 1992; Microphone Fairing Development.
  • Robinson, Julia; 1993; Jet Mixing Enhancement through Air Tabs.
  • Fleming, Alex; 1994; Generation of Synchro-Phase/Intermeshing Tiltrotor Setup.
  • Neibur, Curt; 1995; One versus Two Engine Comparison of F/A-18 Fighter Using ACSYNT.
  • Rivamonte, Mary Lyn G., 1996; The Effect of Increased Helicopter Activity on Noise Induced Annoyance.
  • Gajjar, Nihal; 1996; Helmholtz Resonators and Their Applications.
  • D’Agostino, Michael; 1996; The Effect of Grazing Flow on the Noise Cancellation Properties of Helmholtz Resonators.
  • Rivamonte, Mary Lyn G.; 1997; Use of Helmholtz Resonators as Acoustic Absorbers in a Reverberation Room.
  • Hultz, Paul; 2000; Development of an Impulse Technique for Measurement of Acoustic Impedance.
  • Eichfeld, Jahn; 2001; Development of a Free-Field Impulse Technique for Measurement of Acoustic Impedance.
  • Raabe, Chris; 2002; Isolation of Trailing Edge and Wingtip Vortex Noise.
  • Cook, Brian; 2003;  Building an infrasound source based on the Theory of Percussion Instruments
  • Boon, Cayce, M.; 2003; Application of Beadlike Helmholtz Resonators to Selected Industrial Products for Noise Reduction.
  • Wegner, Markus; 2005: Noise Attenuation of Centrifugal Fans.
  • Reilley, Kevin; 2010: Study of Plate Separation on Transmission Loss through Plexiglass.
  • Russell, Nicolas; 2010: Electricity Production from Everyday Occurrences.
  • Barbeli, Natasha; 2011: Anechoic Chamber Calibration and Nonlinearities associated with Various Probed Microphones.
  • Reilley, Kevin; 2011, Energy Harvesting With a Rocking Chair. (Rocking motion converted to rotational motion)
  • He, Shaolin, 2012; Energy Harvesting Design for Rocking Chair. (Rocking motion converted to sliding motion of magnets passing over coils
  • Carrigan, John; 2012: “Energy Harvesting Using a Rocking Chair.” (Rocking motion converted to rotational motion of a bidirectional turbine.)
  • Schuttler, Willem; 2012: Schlieren Visualization of Flow Impingement Mechanisms (Part 1)
  • Mittleman, Josh; 2012: Propagation of Acoustic Impulses through Rocket Nozzles (Part 1)
  • Mattingly, Joseph; 2012: The Role of Impingement Surfaces on Jet Noise (Part 1)
  • Mattingly, Joseph; Spring 2013: Role of Impingement Surfaces on Jet Noise (Part 2)
  • Chang, Hannah; Fall 2013: Design Process of Jet Noise Attenuation using Water Injection
  • Dickey, Darryl; Fall 2013: Effect of the Jet’s Plenum Chamber on Jet Noise Measurements
  • Mittleman, Josh; Summer 2013: Propagation of Acoustic Impulses through Rocket Nozzles (Part 2)
  • Kumar, Vaibhav; Fall 2014Energy Harvesting from Finger Tapping and Passive motion
  • Kumar, Vaibhav; Spring 2015: Building & Using a Turn-Key Impedance Tube for Acoustic Absorption Measurements

Kumar, Vaibhav; Fall 2015: PURA Project: Active Control of Liner Impedance via Variation of Perforate Orifice Geometry